WALL GRAPHIC INSTALLATION

1. Before beginning your application, please remove your wall graphic from its container. Let it lay flat to attain room temperature for approximately 20 -30 minutes.

2. For best results please apply to a clean, dry, flat surface. Two people will also make installation easier.

3. There is a thick black line surrounding the graphic. Gently peel this line away (it should take away the outer black outline, leaving a gutter around the graphic.)

4. Before you begin peeling, position your dragon or graphic on the selected surface for application.

5. Locate the peel arrow, and remove that section of the dragon or graphic, taking care to peel from the larger areas to the narrower areas. Only peel a portion of the graphic you are comfortable handling, working your way down slowly.

6. Crease the backing paper of the section you just peeled, apply to surface from the outside to the inside, smoothing the graphic with wide strokes. If there is a narrow intersection (such as a wing or wing joint) be sure to begin a second peel from the wing tip to the body. For best results, a foam paint roller or paper towel covered credit card will assist in laying down the graphic smoothly.

7. After the graphic is applied to the surface and there are any air bubbles or creases just pull up and re-apply. This material is reuseable and readjustable.